Home > Reports > Europe Inductors, Cores and Beads Market Includes Latest Trends, Share, and Forecast 2030

Europe Inductors, Cores and Beads Market

Europe Inductors, Cores and Beads Market to Grow with a CAGR of 3.95% through 2030

Published On : 21 Nov, 2022
Updated On : 23 Nov, 2022
Table of Content Download Sample

Market Snapshot

Base Year:
2021
Study Period:
2020-2030
CAGR:
3.95 %

The Europe Inductors, Cores and Beads market is anticipated to reach a value of USD 1.98 billion by 2030 with a CAGR of 3.95%. An inductor is a passive electrical component with two terminals that, when an electric current is passed through it, stores energy as a magnetic field. Other names for an inductor include a coil, choke, or reactor. Typically, an inductor is made up of a wire that has been insulated and wound into a coil.

A core is typically the most fundamental unit of computation in a central processing unit (CPU). It is capable of running a single programme context (or multiple ones, if it supports hardware threads such as hyperthreading on Intel CPUs), maintaining the correct programme state, registers, and execution order, and carrying out operations via ALUs. On-core caches that contain copies of frequently accessed memory chunks can also be held within a core for the purposes of optimization.

In order to filter out the unwanted signal, chip beads are utilised to take in high-frequency noise, convert it into heat, and then release the heat (noise). Ferrite beads and cores are used in the design of equipment to suppress and dissipate high frequency noise levels caused by electromagnetic devices. These noise levels can be detrimental to the operation of the device. Attenuating electromagnetic interference (EMI) is the purpose of the components known as ferrite, which can be very effective.

Get more information on this report Download Sample Report

Market Overview

Europe Inductors, Cores and Beads Market Drivers

Surge in demand for consumer electronics in Europe

Trends such as work-from-anywhere have successfully increased the importance of advanced wireless technologies. Because of their long-term usage capabilities, wireless technologies were in high demand even before the coronavirus outbreak. Laptops, PCs, and televisions are examples of products that consumers consider to be a significant investment.

The European consumer electronics market is expanding at a rapid pace, driven by constant technological advances. The Internet of Things (IoT), artificial intelligence (AI), smartphones, smart homes, smart TVs, and connected automobiles are just a few examples of how consumer electronics have infiltrated every aspect of human life.

This industry is constantly on the lookout for new and improved technologies and ideas that not only capture people's imaginations but are also relevant to solving day-to-day problems. Matter: a smart home operating system, developed in collaboration with Apple, Google, and Amazon, is scheduled to be released this year.

Europe Inductors, Cores and Beads Market Restraints

Supply chain challenges faced during the pandemic

Prices for raw materials such as nickel, iron, and molybdenum have shifted dramatically. As a result of the pandemic's impact, the global precious metal market is experiencing the negative consequences of supply chain challenges, which have an impact on market pricing.

Because nickel is an essential component of the steel industry and thus vital to industrial countries, the metal's price has recently been influenced by ongoing supply-side constraints.

Because nickel is an essential component of the steel industry and thus vital to industrial countries, the metal's price has recently been influenced by ongoing supply-side constraints. Furthermore, price fluctuations in materials such as dielectric ceramics have a significant impact on pricing. The cost of the product is significantly influenced by the fact that market vendors tend to keep their stock based on the price of the material and market availability.

Metal pricing and availability fluctuations have historically been the most significant risk factors in the cost of producing both mass-produced inductors, each with billions of components.

Segment Overview

By inductor application, the segment is divided into power inductors and frequency inductors. The global inductors, cores, and beads market was dominated by the power inductors segment.

A power inductor is an electronic device that receives and stores electrical energy via a magnetic field. A circuit with varying current or voltage maintains a constant current. Power inductors are used in voltage conversion situations because they have lower core losses, which are used to reduce signal loss in system design and filter ESR (Electromagnetic interference) noise. Technological advancements that enable improved chemical vapour deposition have resulted in improved product quality and size reduction, increasing market demand.

The market for inductors, cores, and beads is divided into air/ceramic core, ferrite core, and other core types based on inductor core. The air/ceramic core segment dominated the market for inductors, cores, and beads.

When compared to other core materials, the relative permeability of the air core is quite low. As a result, the air core has a lower inductance than ferrite, ceramic, and other core materials. One of the major advantages of air-core inductors is the low signal loss at higher magnetic field strengths. An air-core inductor can transport electromagnetic frequencies up to 1 GHz when the frequency exceeds 100 MHz, whereas ferromagnetic core inductors experience loss.

Ceramic is one of the most commonly used materials for inductor cores. Its primary function is to shape the coil. In some designs, it also serves as the framework for the terminals. Ceramic has a very low thermal coefficient of expansion. This results in reasonably good inductance stability over a wide temperature range.

The Europe inductors, cores, and beads market is divided into multilayer chip, moulded SMD wire wound, axial, and radial inductors. The multilayer chip segment dominated the market for inductors, cores, and beads.

In multilayer chip inductors, several layers of coiled wires are wound around a central core. Increasing an inductor's inductance by adding more layers of coiled wire increases the capacitance between the wires. In multilayer chip inductors, higher inductance is exchanged for a lower maximum operating frequency.

Consumer electronics and automotive are likely to drive up demand for inductors, cores, and beads. The demand for electronic components in the automotive industry is expected to grow dramatically as electric vehicles and autonomous solutions become more prevalent, resulting in a faster increase in demand for inductors.

Regional Overview

Europe Inductors Cores and Beads Market Countrywise Analysis

Countrywise Growth Insights Request Sample Pages

The Europe inductors, cores and beads market is divided into UK, Germany, France, Italy & Rest of Europe, on the basis of country. In Q4/2021, European component distribution experienced massive growth, and the year ended with new record sales levels. According to member reports, semiconductor sales increased 39.4% in Q4/2020 to a new record level of 2.62 billion Euro. IP&E (Interconnect, Passive, and Electromechanical) components increased by 39.5% to a new high of 1.13 billion Euro. Distribution sales in 2021 increased by 25.4% across all components to more than 13.9 billion Euro.

Major Players

  • TDK Corporation
  • Vishay International Inc.
  • Panasonic Corporation
  • Murata Manufacturing Co. Ltd
  • Taiyo Yuden Co. Ltd
  • Kemet Corporation
  • AVX Corporation
  • Texas Instruments
  • TT Electronics PLC
  • Hefei MyCoil Technology Co. Ltd.
  • Other Prominent Players

Recent Developments

  • May 2022, TT Electronics, a global provider of engineered technologies for mission-critical applications, has introduced a new line of high-precision digital pressure gauges. The DPG series is TT's first line of digital pressure gauges, drawing on the company's deep expertise in pressure sensors.
  • April 2022, Today, TAIYO YUDEN CO., LTD. announced the launch of the AEC-Q200 qualified wire-wound ferrite power inductors LCXH series. This series has 64 items in 6 sizes, including the LCXHF3030QK. These power inductors are made to be used as choke coils or noise filters in power supply circuits for automotive body systems and information systems like infotainment ECUs.

Europe Inductors, Cores and Beads Market: Segmentation

By Inductor Application

  • Power Inductors
  • Frequency Inductors

By Inductor Core

  • Air/ceramic Core
  • Ferrite Core
  • Other Core Types

By Inductor Type

  • Multilayer Chip
  • Molded SMD Wire Wound
  • Axial
  • Radial

By End-Users

  • Automotive
  • Aerospace and Defence
  • Communications
  • Computing and Consumer Electronics
  • Other End-user Industries

By Country

  • United Kingdom
  • France
  • Germany
  • Italy
  • Russia
  • Spain
  • Rest of Europe
Price Starts From
$3250

Purchase Benefits

  • Eligible for a free updated report next year
  • Completely customizable scope
  • 30% discount on your next purchase
  • Dedicated account manager
  • Query resolution within 24 hours
  • Permission to print the report

As featured on :

Trusted by Fortune 500
Over 30000+ subscribers