Vacuum Mixing Devices Market Size
The global vacuum mixing devices market size was valued at USD 166.01 million in 2024 And is projected to reach from USD 170.21 million in 2025 to USD 207.87 million by 2033, growing at a CAGR of 2.53 % during the forecast period (2025–2033).
Vacuum mixing devices are specialized equipment used in healthcare, to mix and prepare substances under vacuum conditions. These devices typically consist of a mixing chamber, a vacuum pump, and controls to regulate the vacuum level and mixing process. They are commonly used in medical settings, such as in the preparation of bone cement for orthopedic surgeries, where the removal of air bubbles is critical for the quality and performance of the final product. Vacuum mixing devices are used in pharmaceuticals to create consistent blends by removing air, crucial for tablet and ointment production.
The market is experiencing growth due to rising demand in industries such as healthcare and pharmaceuticals. These devices are essential for achieving precise mixing under vacuum conditions, ensuring the quality and performance of products like bone cement in orthopedic surgeries and homogeneous blends in pharmaceuticals.
Vacuum Mixing Devices Market Growth Factors
Increasing Orthopedic Surgeries
The increasing number of orthopedic surgeries, including joint replacements and spinal surgeries, is a key driver for the demand for vacuum mixing devices used in bone cement preparation.
Joint replacements, such as hip and knee replacements, are becoming more common due to an aging population and the increasing prevalence of conditions like osteoarthritis. For instance, as per the article published in American College of Rheumatology, about 790,000 total knee replacements and 544,000 hip replacements are done every year in the U.S. Thus , increasing the demand for vacuum mixing devices that are essential for preparing bone cement, which is used to anchor prosthetic joints to the existing bone during these surgeries.
Spinal surgeries to treat conditions like fractures, degenerative disc disease, and spinal deformities are also on the rise. Vacuum mixing devices are used in these procedures to mix bone cement used in vertebral augmentation procedures like vertebroplasty and kyphoplasty, where the cement is injected into the fractured vertebra to stabilize it.
Orthopedic trauma surgeries, which involve the treatment of fractures and injuries to the musculoskeletal system, also require the use of bone cement in certain cases. Vacuum mixing devices ensure that the bone cement is properly mixed and free of air bubbles, which is crucial for its effectiveness in stabilizing fractures.
Overall, the increasing volume of orthopedic surgeries worldwide is driving the demand for vacuum mixing devices, as they are essential for ensuring the success and longevity of these procedures.
Technological Advancements
Technological advancements in vacuum mixing devices have led to improved mixing efficiency and the incorporation of user-friendly features, driving market growth. One instance of such advancement is seen in the MixeVac III, Bone Cement Mixer, an advanced vacuum mixing system developed by Stryker. The MixeVac III is an advanced cement mixer designed for mixing PMMA-based bone cements quickly, safely, and thoroughly. It features a unique blade biasing system that ensures the blades scrape the bowl whether mixing with or without vacuum, resulting in low porosity mixing.
- The MixeVac III is designed for use in orthopedic procedures where bone cement is used to anchor prosthetic joints to existing bone.
Therefore, such advancements by major companies are contributing to the market growth of global vacuum mixing devices.
Restraining Factors
High Costs Hinder Adoption
The high cost associated with vacuum mixing devices is a significant restraint in the global market. These devices can be expensive to purchase, and the ongoing maintenance costs can also be substantial. The initial investment required for a vacuum mixing device can vary depending on the brand, model, and features, but it is generally higher compared to Conventional mixing.
In addition to the upfront costs, there are also ongoing costs associated with operating and maintaining vacuum mixing devices. This includes the cost of consumables such as vacuum bags or liners, as well as the cost of servicing and repairs. These ongoing costs can add up over time and further contribute to the overall expense of using vacuum mixing devices. As a result, facilities with limited budgets are not able to afford the upfront costs of purchasing a vacuum mixing device or the ongoing costs of operation and maintenance, hindering the market growth.
Market Opportunities
Introduction of customer-centric models
As there are not many recent developments in the vacuum mixing devices market, manufacturers have a prime opportunity to adopt customer-centric models and offer cost-effective solutions that have the potential for increased market penetration and customer loyalty. By focusing on the specific needs and preferences of hospitals and specialty clinics, manufacturers can tailor their products and services to better meet these demands. This can lead to increased customer satisfaction and repeat business.
Additionally, by offering cost-effective solutions, manufacturers can appeal to healthcare providers who are looking to optimize their budgets without compromising on quality. This can be particularly attractive in regions or facilities where healthcare budgets are limited.
Furthermore, targeting growth opportunities through procedures like implant surgery, arthroplasty, and dental procedures can be lucrative for manufacturers as these procedures often require the use of vacuum mixing devices.
- For instance, Teknimed launched VACUUKIT, a vacuum mixing and injection system designed for low and medium-viscosity bone cements used in orthopedic surgeries. It is specifically designed to reduce porosity in the prepared bone cement by applying vacuum, which helps increase the mechanical stability of the cement.
Overall, adopting customer-centric models and offering cost-effective solutions can drive sales revenue for vacuum mixing device manufacturers by enhancing customer satisfaction, increasing market penetration, and targeting growth opportunities in key procedures.
Regional Insights
North America Dominates the Global Market
North America is the most significant global market shareholder and is expected to expand substantially during the forecast period. The ageing population in this area is on the rise which corresponds to an increase of joint-related disorders and a higher rate of fractures and broken bones. This demographic shift drives demand for joint replacement surgeries, where bone cement is a preferred alternative to screws and wires. In the manufacture of bone cement, vacuum mixing equipment is essential and this has been a key factor in market growth. Moreover, market players in North America, such as Zimmer Biomet, DJO Global Inc., and Stryker Corporation, are focusing on launching innovative and reliable products, further driving market expansion
- In terms of market share, the United States vacuum mixing devices market is leading. The prevalence of conditions like arthritis, which is the leading cause of disability among adults in the US, further underscores the need for vacuum mixing devices. As per National Health Interview Survey (NHIS), during 2019 – 2021, an estimated 53.2 million US adults (21.2%) were diagnosed with arthritis, thereby, significantly increasing the demand for orthopedic treatments. Consequently, the increasing prevalence of arthritis and the associated rise in orthopedic treatments are key factors driving the growth of the vacuum mixing devices market in the United States.
- Canada is anticipated to emerge as a major player in the global market for vacuum mixer equipment. Canada is a key player in the global market due to its advanced healthcare infrastructure, significant healthcare expenditure, focus on medical innovation, and increasing incidence of orthopedic and dental conditions. These factors are driving the market growth and reinforcing Canada's emerging role in this field.
The market is expected to expand in the Asia Pacific region. With countries such as India, Thailand, and Malaysia becoming popular destinations for affordable and high-quality healthcare, the region is experiencing a surge in medical tourism. In these countries, the demand for vacuum mixing devices is driven by an influx of foreign patients who seek orthopedic procedures.
- The Indian market for vacuum mixing devices has a major role to play in shaping the dynamics of the Asia Pacific vacuum mixing devices market. India hosts a growing number of local and international medical device manufacturers. These companies are concentrating on R&D to produce innovative and cost-efficient vacuum mixers that meet the demands of the Indian market. The availability and affordability of the market is enhanced by this local production capacity.
- For example, in India, Ampro Dental has launched a vacuum mixer calledVac Mix R. In response to growing demand in the Indian market for high-technology dental equipment, this portable and robust device provides a bubbleless mixing of dental materials with features such as two Mixing Pan sizes and an integrated Digital Timekeeper which enhance the quality of oral procedures.
- The market is expected to be dominated by China. The Chinese market for medical devices, including vacuum mixers, is significant due to its large population, rapid economic development, and expanding healthcare infrastructure. In addition, the presence of China as a medical device manufacturing hub in the Asia Pacific region allows for competitive pricing and easy access to these products, which further influences market dynamics.
Thus, the factors above are estimated to boost the Asia-Pacific vacuum mixing devices market growth.
Vacuum Mixing Devices Market Segmentation Analysis
By Type
The market is divided into vertical vacuum-mixing devices, rotational vacuum-mixing devices, and vertical twisting vacuum-mixing devices Vertical vacuum-mixing devices excel in efficiency, precision, and consistency, making them the preferred choice in industries requiring high-quality mixing. Their vertical design enhances mixing performance and allows easier access for maintenance and cleaning. Innovations by key manufacturers drive market growth, and these devices have gained significant acceptance due to their longer market presence. Additionally, vertical vacuum-mixing devices are cost-effective, making them an attractive option for industries seeking to reduce costs without sacrificing performance. This combination of versatility, efficiency, ease of use, market adoption, and cost-effectiveness has led to the dominance of vertical vacuum-mixing devices in the global market.
By End-User
The market is bifurcated into hospitals, ambulatory surgical centers, and specialty clinics. The ambulatory surgical center segment is expected to dominate the market. Ambulatory surgery centers (ASCs) are modern healthcare facilities focused on providing same-day surgical care, including diagnostic and preventive procedures. Factors such as the growing number of joint disorders, the increasing burden of the geriatric population, and the rising preference for ambulatory services to avoid unnecessary hospitalization charges are driving the growth of this segment.
- For instance, the number of ASCs has been steadily increasing. The largest operators like United Surgical Partners International (USPI), Envision Healthcare/Amsurg Corporation, and Surgical Care Affiliates (SCA) have expanded their footprint, collectively owning over 1,046 ASCs as of December 31, 2023.
As the number of procedures performed in ASCs increases, the demand for high-quality medical equipment like vacuum mixing devices will continue to rise, reinforcing the ASC segment's leading position in the market.
